BACK PLUNGER INDICATORS
196 Universal Back Plunger Dial Indicators
• Standard: Starrett factory specification • Smooth and accurate operation • Shank diameter is 6.3mm / 1/4”
Cat No Range Resolution Accuracy
Dial Reading Contents
196MA1Z 5mm 0.02mm ±0.02mm/ ±0.001” (one graduation) anywhere on dial
0-100
1,2,3,4,A,B,C,G in case
Hysteresis-1 graduation
196MB1
Cat No
Description
Ref No
196MR
Adapter (mm thread)
1
196R
Adapter (4-48 thread)
2
196R, 196MR
PT05471
PT05471
Hardness steel contact point
3
PT05472
Hardness steel contact point
4
PT05472
attachments
C
• A. Clamp PT99437 With a 33mm / 1-5/16" flat or round capacity – 8mm / 5/16” post (PT03709-1/2) used with PT18718 Snug • B. Tool Post Holder PT99438 9.5 x 19 x 150mm / 3/8” x 3/4” x 6” with upright spindle (PT03820-0) 8 dia. x 114mm length / 5/16" x 4-1/2”. Use with PT18718 Snug • C. Snug Complete PT18718. Post hole has an 8mm / 5/16" diameter and 2.4 - 6.3 mm / 3/32-1/4" holding capacity. Can be used on our 252 Height Transfer Gauge, 57 and 257A and B Surface Gauges, on 657A Magnetic Base and Swivel Post Assembly • G. Hole Attachment 196F. allows indicator be used over obstructions and inside holes to a depth of approximately 40mm / 1-5/8”
A
G
B
18
Powered by FlippingBook