electronic Outside Micrometers
795 & 796 IP67 Electronic Outside MicrometerS
Starrett 796 and 795 IP67 Electronic Outside Micrometers feature a large, easy to ready, high contrast LCD digital display. IP67 protection makes them suitable for use in workshop conditions exposed to coolant, water, dust, or oil. • Standard: DIN 863 • Tungsten carbide measuring faces • Starrett satin chrome finish for reduced glare and increased resistance to rust • Ratchet controller giving uniform pressure and consistent measurements • mm graduation on shell and thimble, 6.35mm spindle diameter • Ring type locking nut for quick and sure locking • Hardened one-piece spindle • Measurement HOLD button • PRESET button to install any reading at any position • Metric / Inch conversion • Zero set at any position • Data output for 795 series • Manual / Auto off after 30 minutes of non-use • Complete with setting standard
795MEXFL-100
795MEXFL-50
Cat No
Range
Resolution
795MEXFL-25
0-25mm / 0-1”
0.001mm / 0.00005”
795MEXFL-50
25-50mm / 1-2”
0.001mm / 0.00005”
795MEXFL-75
50-75mm / 2-3”
0.001mm / 0.00005”
795MEXFL-100 75-100mm / 3-4”
0.001mm / 0.00005”
796MXFL-25
0-25mm / 0-1”
0.001mm / 0.00005”
PT99492
3 Volt battery, CR2032
IP67
IP PROTECTION
An IP number is composed of two numbers, the first referring to protection against solid objects and the second against liquids. First number 6: Totally protected against dust Second number 7: Protection against submersion in water under standardised conditions of pressure for 30 minutes. All 795 and 796 Micrometers include IP67 protection
9
www. starrett .co.uk
Powered by FlippingBook