FLAT-SIDED BLADES PLUNGE AND INCLINED CUTS
PLUNGE BLADES OPENINGS AND POCKET CUTS
KSO-00B10
KSO-00B44
KSO-00B32
KSO-00B34
KSO-00B64
KSO-01C34
KSO-00C34
KSO-00B28
KSO-01C69
KSO-00C69
Flat sides enable flush cutting against walls, floors, or other surfaces. Work in confined areas. Angled cuts in flooring, trim, or panelling Flush cuts against walls or tight corners Cutting openings in drywall or wood where a straight plunge isn’t practical Precision work in remodelling, especially when working around obstacles
Cutting square or rectangular holes in drywall for electrical boxes Pocket cuts in cabinetry or furniture for hardware installation Trimming flooring around obstacles Cutting through wood with embedded nails during demolition Precision carpentry where clean edges are essential Also ideal for soft materials such as plastics and PVC pre-drilling. Perfect for cutting square or rectangular holes in drywall, plywood, or flooring. Work in confined areas. Used for straight-in cutting, openings, and pocket cuts. Ideal for cutting directly into a surface without
PACK QTY
WIDTH x LENGTH(mm)
TPI
TYPE
CAT Nº
1 5 1 5 1 5 1
KSO-00B44 KSO-00B44-5 KSO-00B64 KSO-00B64-5 KSO-00C69 KSO-00C69-5 KSO-01C69
55 x 44
BI-METAL
40 x 64
18
PACK QTY
WIDTH x LENGTH(mm)
TPI
TYPE
CAT Nº
HCS
42 x 69
1 5 1 5 1 5 1 1 5 1
HCS (JAPANESE)
KSO-00B10 KSO-00B10-5 KSO-00B32 KSO-00B32-5 KSO-00B34 KSO-00B34-5 KSO-00B28 KSO-00C34 KSO-00C34-5 KSO-01C34
14
34 x 10
40 x 32
BI-METAL
18
JAPANESE-TEETH
40 x 34
50 x 28
HCS (JAPANESE) HCS
40 x 34
STRAIGHT-IN CUTS WITH MINIMAL TEAR-OUT.
14
Hardwood, clean wood cuts, and drywall.
KSO-01C34
KSO-01C69
Powered by FlippingBook