Diamond Grit Hole Saws
Diamond D
Diameter
Appropriate Arbors
High performance Diamond Grit Hole Saws are perfect for drilling holes in non-metallics and offer the ideal cutting solution for the toughest situations. Featuring a synthetic diamond grit cutting edge permanently bonded to a tough steel body, this provides the necessary clearance for cutting at high speeds.
Cat. No.
Item Number
mm Inch
D0096
AY612
14mm 9/16”
D0058
AY615
16mm 5/8”
D1016
AY618
17mm 11/16”
Carbide Tipped Arbors XA1 XA4 XA1-1 (SDS plus) Kwik-Change with Carbide Tipped Pilot Drill XA015C A6 & A6-2
D0034
AY621
19mm 3/4”
D2532
AY624
20mm 25/32”
FEATURES
D1036
AY627
21mm 13/16”
Hole Saw Depth Tile Drill Depth
41mm (1.5/8”) 20mm (25/32”)
D0078
AY630
22mm 7/8”
• Rapid cutting solution for non-metallics • Smooth surface finish, ideal when cutting glass and ceramics • Supported by a comprehensive range of arbors with carbide tipped pilot drills • The ultimate hole saw for hard-to-cut materials • Small diameter hole saws are perfect for kitchen and bathroom installations • Cutting depth 38mm (1.1/2") • Coolant should always be used with these saws
<3mm
D1056
AY633
24mm 15/16”
D0100
AY636
25mm 1”
3-13mm
Rec. Cutting Depth
D0116
AY639
27mm 1.1/16”
>13mm
D0118
AY642
29mm 1.1/8”
D0136
AY645
30mm 1.3/16”
Ceramic
D0114
AY648
32mm 1.1/4”
Porcelain / Glass / Stone
D0156
AY651
33mm 1.5/16”
D0138
AY654
35mm 1.3/8”
Marble / Granite
D0176
AY657
37mm 1.7/16”
Fibreglass
D0112
AY660
38mm 1.1/2”
D0196
AY663
40mm 1.9/16”
Brick and Masonry
D0158
AY666
41mm 1.5/8”
Cutting Performance
D1116
AY669
43mm 1.11/16”
Excellent
D0134
AY672
44mm 1.3/4”
Good
D1136
AY675
46mm 1.13/16”
D0178
AY678
48mm 1.7/8”
Note: Diamond Tile Drills and Hole Saws should always be cooled with water.
D0200
AY681
51mm 2”
D0216
AY684
52mm 2.1/16”
D0218
AY687
54mm 2.1/8”
D56MM AY690
56mm 2.3/16”
Diamond Grit Tile Drills
D0214
AY693
57mm 2.1/4”
D0256
AY696
59mm 2.5/16”
Carbide Tipped Arbors XA2 XA10 XA17-38 Locking Arbor XA2-1 (SDS plus)
D0238
AY699
60mm 2.3/8”
D0212
AY702
64mm 2.1/2”
D0296
AY705
65mm 2.9/16”
D0258
AY708
67mm 2.5/8”
D68MM AY711
68mm 2.11/16”
• Small diameter hole saw, perfect for kitchen and bathroom installations • Smooth surface finish, ideal when cutting non-hardened glass and porcelain • Drive arbor and drill not required, as the tile drill is held directly in the power tool chuck • Maximum cutting depth of 25mm (1") • Core slot provides cooler cutting and allows for removal of debris produced during drilling
Kwik-Change with Carbide Tipped Pilot Drill XA015C A6 & A6-3* (*up to 100mm / 4”)
D0234
AY717
70mm 2.3/4”
D0278
AY720
73mm 2.7/8”
D0300
AY723
76mm 3”
D0318
AY726
79mm 3.1/8”
D0314
AY729
83mm 3.1/4”
D0338
AY732
86mm 3.3/8”
D0312
AY735
89mm 3.1/2”
D0358
AY738
92mm 3.5/8”
D0334
AY741
95mm 3.3/4”
D0378
AY744
98mm 3.7/8”
D0400
AY747
102mm 4”
KIT, DRILL GUIDE, AND WATER BOTTLE
D0418
AY750
105mm 4.1/8”
Diameter mm Inch
Item Number
D0414
AY753
108mm 4.1/4”
Cat. No.
D0438
AY756
111mm 4.3/8”
D0005
AY606
5mm 3/16”
Cat. No.
Item Number
D0412
AY759
114mm 4.1/2”
D0006
AY607
6mm 15/64”
KD06041 KD06041.
D0434
AY762
121mm 4.3/4”
D0065
AY608
6.5mm 1/4”
Cat. No.
Item Number
#
WCD01 AY7851
D0500
AY765
127mm 5”
D0008
AY609
8mm 5/16”
Cat. No.
Item Number Size Range
D0512
AY768
140mm 5.1/2”
D0010
AY610
10mm 3/8”
DTDG01 AY7850
5mm - 12mm
D0012
AY611
12mm 1/2”
D0600
AY771
152mm 6”
# = MTO - Made to order, may be subject to longer lead times.
16
Powered by FlippingBook